Isn't this same information all available on the Management Report? The only benefit you may get is acquiring data off of a printer that currently doesn't print. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Information is in the machine. I only read it. Most wholeseller make per hand. My programm does it in 20 seconds (reading data structur needs more time) List and label. If you have to evaluate 10, 40 or more machines, it needs much time. In the last years I have had done often.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Thanks for your thoughts!
Of course everything is included in the MML and others. I don't invent anything new, I just read out existing data in a targeted manner. Prepare them graphically and save or print them out within 20 seconds. The great advantage over typing by hand lies in reading out. The data in the MML is far too extensive for a wholesaler. I'm just missing different types at KM and other brands completely to complete the program. That's why I wrote the program newModels. This allows me to adapt the actual program to the data structure of different types and brands. Thanks!
Now, bizhub C-754 is tested, too.
Can anyone who is helping him please explain in English what he is trying to do and what his report is supposed to do?
The way I understand it, this software gathers Management List data like consumable life and counts, for the purposes of evaluating a used machine for possible purchase.
The only benefit I see to this software is to gather data from a printer in an unable-to-print error condition.
This data can easily be reset or spoofed (reset chips) without changing parts, so ... without actually looking at the consumables & print quality, I don't see how it helps evaluating the machine very much. You may catch obviously past-life consumables. That's about it. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The only advantage: It works automatically within 20 seconds! Every wholesaler has to label his machines (PDF file and print automatical) and he needs a list (automatical file):
https://we.tl/t-BJN3yIbNgn
For wholesaler it's only one version. I'm no official KM Dealer. I have no access to their software - so I have to make my one.
Last edited by CP-1015; 06-08-2022 at 03:17 PM.
Got today new from a hardworking helper:
bizhub 367
4050
4052
Ricoh IM C3000
Thank you very much.
The software newmodels is only for me to understand data construction. It reeds about 6-7000 values. For seeing consumables life by KM machines software switch 227 set to hex 00. For comparison I need counter-, consumables- and accessories list, too.
From KM I need speziale C-250i
C-3350
C-3350i
Whether C-250i or C-300i or C-360i is irrelevant. Thanks advanced!
Last edited by CP-1015; 06-08-2022 at 05:56 PM.
Bookmarks