Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Feb 2022
    Location
    Nizhniy Novgorod
    Posts
    17
    Rep Power
    1

    с6000l with 4661 error code

    After replacing the developer I got a whole bunch of problems although all the adjustments were passed and done quality wasn't quite good. Checked the cleaning unit of the ITB and the belt itself and both were ok, Cleaned the IDC sensors but still err 2 on color autimatic adj, and the machine doesn't pass gamma auto adj. Running I / O Check mode 36-3 / 36-4 / 36-5 found out one of the idc sensors (the far under the code ..-05) showing 0 in output value and that's where i got completely stuck. If you guys have any thoughts where to get the sensor from or what to do I'd really appreciate that/

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Posts
    582
    Rep Power
    53

    Re: с6000l with 4661 error code

    More info would be helpful...
    Machine counter, parts life counter (drum, developer, charge unit...)
    Did you follow procedure from service manual ?

  3. #3
    Master Of The Obvious 10,000+ Posts
    с6000l with 4661 error code

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,725
    Rep Power
    412

    Re: с6000l with 4661 error code

    I've seen those IDC sensors bad before. Also check that the shutter is opening up far enough for the sensor to see the transfer belt. If that mechanism gets bent (and it does), the shutter opens only 1/2 way. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician
    Join Date
    Feb 2022
    Location
    Nizhniy Novgorod
    Posts
    17
    Rep Power
    1

    Re: с6000l with 4661 error code

    I'll check the shutter opening gate. That started after developer replacement, aut developer charge was donw, automatic color registration was done, automatic gamma adj was also done and few prints but the quality was poor and the problem stated with a laser error 53-01 i believe, but then it was gone, lasers can adjust itself. and then a parade of IDC errors

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Posts
    582
    Rep Power
    53

    Re: с6000l with 4661 error code

    If you did not run Toner density init first after developer replace that could be your problem.

  6. #6
    Senior Tech 100+ Posts
    с6000l with 4661 error code

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    235
    Rep Power
    21

    Re: с6000l with 4661 error code

    Quote Originally Posted by blackcat4866 View Post
    I've seen those IDC sensors bad before. Also check that the shutter is opening up far enough for the sensor to see the transfer belt. If that mechanism gets bent (and it does), the shutter opens only 1/2 way. =^..^=
    Seen this a few times. You can reach in and manually tape the shutter open for testing purposes. Color registration sensors do go bad also. Just had to order one myself for a Accuriopress C2060. This is the second Color Registration sensor I've had to replace on the C1060 series. C6000 is similar.

    Run the density balance chart and insure that yellow looks dense enough for sensors to read. If it isn't, look into developer, drum, transfer issues first. 1st transfer rollers inside belt unit can sometimes come out of position. If the CR sensors are bad, or the shutter, it will always throw the code for yellow. It won't be any other colors as it stops after yellow.

  7. #7
    Technician
    Join Date
    Feb 2022
    Location
    Nizhniy Novgorod
    Posts
    17
    Rep Power
    1

    Re: с6000l with 4661 error code

    a little upd on the whole situation, replacement procedures I believe were done correctly and it had pass all the adj but I'll do toner density initiation again, yet it's just a weird start of error parade coming next such as now throwing 2243, couldn't find code for I/O checking of the drum speed (drum is new just installed)

  8. #8
    Technician sendpiks's Avatar
    Join Date
    Dec 2017
    Location
    New Zealand
    Posts
    14
    Rep Power
    10

    Re: с6000l with 4661 error code

    Highly likely this is problems with shutter for IDC sensors, I have very similar problems on my 8000. Solution was to keep IDC sensors opened all the time. Tape it in open position and DO NOT make registration auto adj. Color gamma adj make from front panel menu as usual.
    Maybe it will help.

  9. #9
    Technician sendpiks's Avatar
    Join Date
    Dec 2017
    Location
    New Zealand
    Posts
    14
    Rep Power
    10

    Re: с6000l with 4661 error code

    Quote Originally Posted by schlf View Post
    (drum is new just installed)
    Do you screwed out and throw away small RED screws on drums?
    One time when I was at very very beginning of my Konica way I put new drums without taking out red screws and this give looots of funny errors

  10. #10
    Technician
    Join Date
    Feb 2022
    Location
    Nizhniy Novgorod
    Posts
    17
    Rep Power
    1

    Re: с6000l with 4661 error code

    Quote Originally Posted by sendpiks View Post
    Do you screwed out and throw away small RED screws on drums?
    One time when I was at very very beginning of my Konica way I put new drums without taking out red screws and this give looots of funny errors
    Exactly my problem to be honest, didn't know that was a thing and was just checking if drums are identical.
    Thanks a lot everyone for help

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here