how to cancel chip or reset chip for toner
how to cancel chip or reset chip for toner
engine dip switch can force it to display full
1. Call the Service Mode to the screen.
2. Call the Enhanced Security to the screen. (Stop -> 0 (Zero) -> C (Clear)
3. Touch [Engine FW DipSW].
This is displayed only when Switch No. "59" is set to "01" in HEX Assignment in [Service Mode] -> [System 2] -> [Software Switch Setting]. (is already on for C360i Series)
4. The switch highlighted corresponds to the colour to be reset is highlighted (ON state).
31: Y 32: M 33: C 34: K
If question is referred to bizhub 3320 there is no way to reset toner state without new toner chip.
Agreed, among so many letters and numbers they choose already used combinations.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks