Konica Minolta C364e Hangs at boot logo

[Konicatech]

Most likely need a new SSD board, after fitting it update to the latest firmware.

[techsxge]

Could you explain this more, what first connector?

The Power outlet and the connector where you plug in your cable.

[Oystercopy]

Agree with others, replace SSD
OC

[diksiunix6624]

I was printing, when d office power go off and immediately go on and off again. D next morning i try to power On the Machine, it will just show the 1st logo and hang dea for about 2 to 3 mins, it will go off and restart its self. I try going in to trouble reset dsame not even going into d trouble reset just hang on d 1st logo. Pls any solution?

1.Are you already replace the Power Supply Board ?
If already and same

2.can you access to service mode menu ?
If yes, you can check error code on the Counter->Service Call History (Data)
you can show the error code and you can search error code symthom on the service manual.

3.Upgarade the lates version firmware (use the thumdrive and plug on the USB port which close with plate) like Biz C360 procedure upgrade firmware
4.Replace the SSD Board/TPM Board if you have the part number : A5C1H02D15. don't forget to upgrade firmware.

hopely worked