I am facing image repeating issue (see attachment). Everyhitng is fine till last working day when i close my printing setup and today first print same like this...
I am facing image repeating issue (see attachment). Everyhitng is fine till last working day when i close my printing setup and today first print same like this...
Check fusing belt for damage.
Looks like drum K is also bad...
Did it occur on all paper weights?
Looks like you need magenta drum and like other poster said black drum. If it was happening on all colors I would look at transfer belt or fuser belt mentioned in previous post.
Also are you using genuine or aftermarket toner?
As said above, change the drums and after that do stabilization.
Quality should clear up after new parts but if the image is still repeating I would put some OEM toner in the machine and run solid CMYK patterns through it until it clears up, as it can happen on the compatible toners due to them not having any dev carrier in them.
Please let us know what toner you are using.
That sample is giving me a headache. How does mostly one color get stuck to the fusing roller?
Look at the bird image that gets ghosted in magenta about a fusing belt circumference later. Coincidentally falls nicely in the text box
Like Toxic said check the fuser belt surface. The black gets picked up next.
Don't think its a drum could be over toning.
Changing background image adjust for M and K would confirm if the drum is at fault.
Whatever
Most likely there is several problems there, not just one.
I don know why but i have feeling this is higher counter machine poorly maintained and propably with aftermarket toners.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
This is what happens all the time. Original poster asks their first question on the forum several techs waste their time answering and you never hear back from them! Probably because they are using aftermarket parts & toners and didn't like hearing the truth. Either way they will eventually know the FREE help they received here was true and good advice.
Bookmarks