Thanks: 0
Dislikes: 0
i have a problem with a konica minolta c458. the copier jams paper 12-01 and 11-01 both from the first and from the second drawer I tried to change the paper outlet but I have not solved the problem it works fine from the 3rd drawer. it seems as if the rubber tires are not turning.
what could I do?
thanks
bizhub C458 from Tray 2 Jam-code 12-01 (feed roller didnīt rotate)
Check one-way and shaft.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Originally Posted by tsbservice
I had read, however, the gears turn. it seems that there is no current when you have to close the clutch that turns the rubber pads
Where is the paper stopping? Is it making it out of the tray? Does it stop at the same place from both trays?
paper does not feed from the drawer in both trays
Remove tray 1, load paper in tray 2, and watch through the tray 1 gap to see if anything is moving when you try to print from tray 2
I did it but nothing moves
do you have any firmware that you can send me to try an update?
and if possible also the animated guide
konica.copyline@gmail.com
thanks
^^^^most likely cause^^^^^
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
+1 , it's the one way or the Konica Minolta bizhub C458 Paper Feed Drive Assembly A79JR70222
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
after all the tests I suspect that a good technician has mounted the entire pickup roller of another machine in the machine.
the attack is the same but in my opinion the tensions that start the clutches do not return
Likes: 
Reply With Quote
Bookmarks