Konica c364 fax Will receive but not send

[DOE]

Replaced the hard drive and fax now scans originals and works fine. Thanks to Everyone who replied

[DOE]

I had a thought that might help you troubleshoot this..

Install the fax driver on a PC and try to send..You are now bypassing the entire scanning section..If it works the issue is in the scanner, it not, then the fax may be the culprit. I would also go into SM and run a memory check. I have seen RAM go bad and it's not until the bad section is accessed that anything stops. E

Replace the hard drive and now it works fine. Scans originals in for the fax