Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Nov 2008
    Location
    manchester
    Posts
    24
    Rep Power
    0

    C450 Colour Registration

    Hi All,

    I'm having a problem with a C450 with colour registration
    the machine has 400k on it.

    On A3 the final quarter of the copy only,the colour registration of out by 1-2mm, this is on copy and print mode and intermittant.

    I have cleaned the LEDs and the sensors under the plate.
    re-initisalized and re-set machine and done the gradation adjust.

    the transfer belt has been refired as has the transfer roller,
    I have on order new ones which should arrive next week,
    However if this should not cure the problem any suggestions?

    This only happens on A3

    Billy

  2. #2
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Posts
    247
    Rep Power
    34
    What firmware version? There was a problem with this in the early versions.

  3. #3
    Technician
    Join Date
    Nov 2008
    Location
    manchester
    Posts
    24
    Rep Power
    0
    Machine is running on KO,

  4. #4
    PSP 100+ Posts
    Join Date
    Oct 2008
    Location
    nvt
    Posts
    183
    Rep Power
    33
    How is the first copy/print is this one OK

  5. #5
    Technician
    Join Date
    Nov 2008
    Location
    manchester
    Posts
    24
    Rep Power
    0
    I've not been able to reproduce this fault myself,
    however some on the copies shown to me have been single prints,

  6. #6
    PSP 100+ Posts
    Join Date
    Oct 2008
    Location
    nvt
    Posts
    183
    Rep Power
    33
    Quote Originally Posted by oce bill View Post
    I've not been able to reproduce this fault myself,
    however some on the copies shown to me have been single prints,
    make single copies and then make a run of for example.
    Check if the single is OK and from the run from the second print color shift

    Also is this on heavy stock paper ?? There is special firmware for customers who are printing on heavy stock!!

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jul 2007
    Location
    Edmonton, Alberta
    Posts
    84
    Rep Power
    35
    try turning down the fuser speed for the type of stock, if the fuser speed is too high it pulls on the transfer belt and screws up the registration on the next copy

  8. #8
    Technician
    Join Date
    Jan 2009
    Location
    Wisconsin
    Posts
    10
    Rep Power
    32
    You may want to replace the FUSING PAPER LOOP SENSOR (PC4) and if that doesn't help I have seen fusing units cause this problem. The problem seems to be due to incorrect fuser speed.

  9. #9
    Technician
    Join Date
    Nov 2008
    Location
    manchester
    Posts
    24
    Rep Power
    0
    Thanks for all your suggestions, The fuser unit has been replaced about 70k back and this fault only began to appear after replacement. So the fuser speed could be a good place to start, The customer only uses 100gsm superwhite paper which is really great quality paper. I'll get back with results after dropping the fuser speed and replacing the transfer belt and roller
    Many Thanks
    billy

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here