C3320i with Fax Board

[albemero]

Hi Folks
We sold a new C3320i + FK-517.
the customer want to send fax and she want the tx report with the first page printed on the tx report.
I ve set it in Service Mode but the tx report is not printed always with the first seite on it.
The Firmware is KJ and SW 25 is set to 30Hex.
I hope all I ve write is understandable.
Thak you for your time

[JasonSBE]

Assuming you have the Fax Kit installed correctly, the default setting will be to only print a tx report if the fax fails to go through. You need to go to the administrator menu and in the fax section you should have a setting to turn the report on for every fax.

[Firmaware]

The tx report is printed every time. The tx ve always success. One time is the tx report printed with the first seite, other times without.

Gesendet von meinem SM-G980F mit Tapatalk

[Synthohol]

in service mode, fax, list output select "with image"

[Firmaware]

The customer hat tipped simply the telephone icon in the upper parts of display. Thanks all

Gesendet von meinem SM-G980F mit Tapatalk