Installed the FK-512 fax kit, done it many times before and they are usually plug and play and the fax options then appear automatically in both service mode and utility/admin mode.
Not on this unit though. Any ideas? Thanks in advance.
Installed the FK-512 fax kit, done it many times before and they are usually plug and play and the fax options then appear automatically in both service mode and utility/admin mode.
Not on this unit though. Any ideas? Thanks in advance.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
According to the installation guide, that is all that is needed for it to show up in the system. I see there are 3 possible connections for the USB cable on the system board, so make sure it is connected to correct one and it should show up.
C3110 Fax Connections.jpg
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Bookmarks