Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Senior Tech 250+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    463
    Rep Power
    18

    Re: bizhub C287 C5356

    Quote Originally Posted by Walterj View Post
    Hello
    Good day
    Actually, this error is quite common in the first Bizhub 227/287/367 equipment.
    I recommend you change the FM2 cooling fan and check the ICP12E that is located in the MFPB, surely that ICP must be open and you will have to replace it.
    Then maybe the prints come out blank in that case you will also have to check the HV and check which electronic device is damaged.
    It is recommended that you have your equipment in the version of FW G00-X8 or G00-X4
    Luck
    Thank you for your advice. I tried to replace fan motor FM2 but not success, updated firmware to G00-Y3.
    If ICP opened that means I should replace MFPB right? such I can't buy ICP individually.

  2. #12
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: bizhub C287 C5356

    Quote Originally Posted by jwai View Post
    Thank you for your advice. I tried to replace fan motor FM2 but not success, updated firmware to G00-Y3.
    If ICP opened that means I should replace MFPB right? such I can't buy ICP individually.
    Yes you should replace the ICP. The are marked with letter values like I,L,M. You should be able to order them.
    Find an old board with the same value on or just bridge it out instead of replacing the MFPB.
    Whatever

  3. #13
    Senior Tech 250+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    463
    Rep Power
    18

    Re: bizhub C287 C5356

    Unluckily I don't have spare board for ICP replacement, finally I need to purchase an used MFPB.
    If I replace it, need MFP reset tool? This is my first time to do that on this model.

  4. #14
    Senior Tech 250+ Posts
    Join Date
    May 2018
    Location
    Hong Kong
    Posts
    463
    Rep Power
    18

    Re: bizhub C287 C5356

    Could anyone provide me MFP reset tool of bizhub 287?
    Thanks a lot.

  5. #15
    Junior Member
    Join Date
    Apr 2023
    Location
    Saratov
    Posts
    1
    Rep Power
    0

    Re: bizhub C287 C5356

    Quote Originally Posted by walterj View Post
    Hello,Good afternoonIn fact, this error is quite common in the first bizhub 227/287/367 hardware.I recommend that you replace the fm2 cooling fan and check the icp12e that is in the mfpb, for sure this icp should be open and you will have to replace it.Then, perhaps, the prints turn out to be empty, in which case you will also have to check the hv and find out which electronic device is damaged.It is recommended that you have the hardware version fw g00-x8 or g00-x4luck
    Good afternoon. Tell me what you need to check hv. Thank you in advance.

  6. #16
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: bizhub C287 C5356

    Quote Originally Posted by feedot View Post
    Good afternoon. Tell me what you need to check hv. Thank you in advance.
    Hi there new comer. Please create a new thread describing your issue please the problem you have is unrelated.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here