konica minolta bizhub 287 stuck on start up screen

[Jimdale]

the machine is stuck on its start up screen. I turned it on holding reset and the dot is on the top right. but cant get past that
I read about dv ram or resetting.. what has anyone had any luck with to reset these?

thanks much

brent

I had this same problem on a BZ 364. It ended up being the SATA cable (HDD to Control PWB)

[Albonline]

I am thinking since the new firmware didnt work nv ram is my next bet.. when the stick is in the mfp wont download.. it tells me invalid external memory please make sure the external memory.. lol

brent

firmware wont load if there is an initialization error on the main body.

try unhooking some major loads .worst case try running789be on this board before changing it out, also the hdd driver/adapter board is a known failure point on these. see if it makes a change with the ssd removed. if it acts the same with or without ,the ssd isn't starting.