Thanks: 
Likes: 
Dislikes: the machine is stuck on its start up screen. I turned it on holding reset and the dot is on the top right. but cant get past that
I read about dv ram or resetting.. what has anyone had any luck with to reset these?
thanks much
brent
the machine is stuck on its start up screen. I turned it on holding reset and the dot is on the top right. but cant get past that
I read about dv ram or resetting.. what has anyone had any luck with to reset these?
thanks much
brent
No Error Code displaying? Maybe disconnect the HDD and try to boot againOriginally Posted by brent
nope no error code tried to boot several times just sits idle with the copy light at red..
that sounds like hdd or nv ram to me. Worst case would be the main board
Try reloading firmware first. May be corupt.
going to try firmware today and we will see.. thank you
brent
If firmware fails and disconnecting options,HDD, etc also don't helps may be corrupted eMMC.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
check the optics not the most likely but I have seen twice the flat cable to the cis/1st mirror cracked and shorting the scanner down.
I am thinking since the new firmware didnt work nv ram is my next bet.. when the stick is in the mfp wont download.. it tells me invalid external memory please make sure the external memory.. lol
brent
Could be that another brand of stick could work. Happen to me once to often that the USB drive is the problem.
Whatever
Reply With Quote
Bookmarks