Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27
  1. #11
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    970
    Rep Power
    44

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Well I tried newer one. Still does that wavy half of the paper.
    Forgot to mention that when printing on both sides of the paper, the whole page is wrinkled or wavy.
    I have only had 1 ever go bad, but what about the motor that drives the reverse unit?

  2. #12
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Albonline View Post
    I have only had 1 ever go bad, but what about the motor that drives the reverse unit?
    Well I replace the reversal unit with another one from a 554e.

    Can not find the issue with this.
    Last edited by Barry97; 08-16-2022 at 09:04 PM.

  3. #13
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    5,605
    Rep Power
    240

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Print out is wavy. Tried changing the paper and replaced the fusing unit for a new one.
    Tried adjusting the temperature and the fusing speed.
    Cleaned the rollers.
    Replaced the fusing drive.
    Replaced the exit and reverse section.
    Still the papers come out wavy.
    This happens on all format sizes.

    Seems like this happens after the fusing unit.

    Running out of options.
    It may sound silly but can you run it for a test without reverse section(I mean top section on right door)?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  4. #14
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by tsbservice View Post
    It may sound silly but can you run it for a test without reverse section(I mean top section on right door)?
    Caused a paper jam.
    Still the fuser is causing the wavy page.

  5. #15
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by tsbservice View Post
    It may sound silly but can you run it for a test without reverse section(I mean top section on right door)?
    Is there any possibility if the frame is bent?

  6. #16
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    970
    Rep Power
    44

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Is there any possibility if the frame is bent?
    is the feed loop sensor damaged?

  7. #17
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Albonline View Post
    is the feed loop sensor damaged?
    Ran the sensor check. Looking at the Paper exit in service mode. The fusing loops value remains at 0.

    Can the cause the paper to be wrinkled/wavy?

  8. #18
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    970
    Rep Power
    44

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Ran the sensor check. Looking at the Paper exit in service mode. The fusing loops value remains at 0.

    Can the cause the paper to be wrinkled/wavy?
    yes registration clutch stays on until loop sensor is made. this issue is more prevalent in the 654/754 series but this unit shares same basic operation.

  9. #19
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Albonline View Post
    yes registration clutch stays on until loop sensor is made. this issue is more prevalent in the 654/754 series but this unit shares same basic operation.
    So there must be a synchronization issue with two units?

  10. #20
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    970
    Rep Power
    44

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    So there must be a synchronization issue with two units?
    yes that is one of the functions of the loop sensor

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here