Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    C454e printouts are wavy.

    Print out is wavy. Tried changing the paper and replaced the fusing unit for a new one.
    Tried adjusting the temperature and the fusing speed.
    Cleaned the rollers.
    Replaced the fusing drive.
    Replaced the exit and reverse section.
    Still the papers come out wavy.
    This happens on all format sizes.

    Seems like this happens after the fusing unit.

    Running out of options.

  2. #2
    Senior Tech 250+ Posts
    C454e printouts are wavy.

    Kenny's Avatar
    Join Date
    Jun 2009
    Location
    Leeds
    Posts
    354
    Rep Power
    32

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Print out is wavy. Tried changing the paper and replaced the fusing unit for a new one.
    Tried adjusting the temperature and the fusing speed.
    Cleaned the rollers.
    Replaced the fusing drive.
    Replaced the exit and reverse section.
    Still the papers come out wavy.
    This happens on all format sizes.

    Seems like this happens after the fusing unit.

    Running out of options.
    C454E
    (16) - A0ED811800Gear 22/23T
    (22) - A0ED813200Gear 22/26T (COUNT THE TEETH ON BOTH GEARS)


    ONLY EVER HAD THIS WHEN ONE OF OUR ENGINEERS HAS USED A C454 REVERSAL SECTION FOR A C454e

  3. #3
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Kenny View Post
    C454E
    (16) - A0ED811800Gear 22/23T
    (22) - A0ED813200Gear 22/26T (COUNT THE TEETH ON BOTH GEARS)


    ONLY EVER HAD THIS WHEN ONE OF OUR ENGINEERS HAS USED A C454 REVERSAL SECTION FOR A C454e
    Is the reversal unit from 554e compatible with 454e?
    I counted 22

  4. #4
    Senior Tech 250+ Posts
    C454e printouts are wavy.

    Kenny's Avatar
    Join Date
    Jun 2009
    Location
    Leeds
    Posts
    354
    Rep Power
    32

    Re: C454e printouts are wavy.

    Quote Originally Posted by Barry97 View Post
    Is the reversal unit from 554e compatible with 454e?
    I counted 22
    yes the C554e is the same as a C454e

    as i say make sure BOTH gears mentioned above have the exact amount of teeth.

    on the C454 they do have a gear that has 22/27t so count the upper and lower teeth.

    if you have a spare C454e or C554e reversal unit in i would just take the full unit and replace

    EDIT: i have just checked the exit section gears and they are all the same for e and non e machines so would defiantly go with reversal section

  5. #5
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Kenny View Post
    yes the C554e is the same as a C454e

    as i say make sure BOTH gears mentioned above have the exact amount of teeth.

    on the C454 they do have a gear that has 22/27t so count the upper and lower teeth.

    if you have a spare C454e or C554e reversal unit in i would just take the full unit and replace

    EDIT: i have just checked the exit section gears and they are all the same for e and non e machines so would defiantly go with reversal section
    Yup still the same problem. Is there a way to change the software settings for this?


    What are the odds eh, if the units I am trying are all defective I did change the reversal unit. Trying the unit from 554e. Last option. I try an out of the box unit.
    Last edited by Barry97; 08-16-2022 at 04:30 PM.

  6. #6
    Certified Konica Expert 2,500+ Posts
    C454e printouts are wavy.

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,879
    Rep Power
    144

    Re: C454e printouts are wavy.

    If you have the exit section out, don't forget to scuff the shaft for the one way gear before reinstalled
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Sep 2008
    Location
    Flat Rock Michigan
    Posts
    970
    Rep Power
    44

    Re: C454e printouts are wavy.

    did you try running it without a finisher?

  8. #8
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by Albonline View Post
    did you try running it without a finisher?
    No finisher on this one.

  9. #9
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    762
    Rep Power
    43

    Re: C454e printouts are wavy.

    Have you replaced the fuser?

  10. #10
    Technician
    Join Date
    Jun 2022
    Location
    Sept-Iles, Quebec
    Posts
    22
    Rep Power
    1

    Re: C454e printouts are wavy.

    Quote Originally Posted by tech51 View Post
    Have you replaced the fuser?
    Well I tried newer one. Still does that wavy half of the paper.
    Forgot to mention that when printing on both sides of the paper, the whole page is wrinkled or wavy.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here