Bizhub 501 Show C-C286 Error Code

[manzoorwighio]

Konica Bizhub 501 Show C-C286 Error Code How to Solve it ?

[Synthohol]

C-C286

Non-volatile memory abnormality

Overall control board (OACB) NVRAM board (NRB

if the nvram has a battery, sutrely it must be dead by now, that an old ass machine.


NVRAM board (NRB) error code display priority
When two or more error codes related to NRB occur at the same time, a code with the highest precedence is displayed according to the priorities shown below.
1. C-C287 → 2. C-C288 → 3. C-C286 → 4. C-C284 → 5. C-C285

[manzoorwighio]

C-C286

Non-volatile memory abnormality

Overall control board (OACB) NVRAM board (NRB

if the nvram has a battery, sutrely it must be dead by now, that an old ass machine.


NVRAM board (NRB) error code display priority
When two or more error codes related to NRB occur at the same time, a code with the highest precedence is displayed according to the priorities shown below.
1. C-C287 → 2. C-C288 → 3. C-C286 → 4. C-C284 → 5. C-C285

Thanks Your Very Much Sir
Without replacement of NVRam any solution ?

[emujo2]

"OACB or NVRAM" If you want to take a chance, try a new battery and firmware.

[Synthohol]

try a trouble reset yet?

turn ON the main power switch (SW1).

2. With the Utility/Counter key pressed, turn ON the power switch (SW2).

3. Press [Trouble reset] to release a trouble with [OK] displayed.

4. Turn OFF and ON the power switch (SW2).