Konica Bizhub 501 Show C-C286 Error Code How to Solve it ?
Konica Bizhub 501 Show C-C286 Error Code How to Solve it ?
C-C286 Non-volatile memory abnormality
Overall control board (OACB)
NVRAM board (NRB
if the nvram has a battery, sutrely it must be dead by now, that an old ass machine.
NVRAM board (NRB) error code display priority
When two or more error codes related to NRB occur at the same time, a code with the highest precedence is displayed according to the priorities shown below.
1. C-C287 → 2. C-C288 → 3. C-C286 → 4. C-C284 → 5. C-C285
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
"OACB or NVRAM" If you want to take a chance, try a new battery and firmware.
try a trouble reset yet?
turn ON the main power switch (SW1). 2. With the Utility/Counter key pressed, turn ON the power switch (SW2). 3. Press [Trouble reset] to release a trouble with [OK] displayed. 4. Turn OFF and ON the power switch (SW2).
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks