Anyone have an observation for this particular issue?
Let me set the stage, the ITB was a wreck. It was split/cracking on the front side and the Transfer Belt Cleaning Unit was certainly due for replacement. THOROUGHLY cleaned the ITB assembly and inspected the rollers, all seem well enough. Replaced the ITB and TBCU. System is perfectly happy with the new parts and print quality is perfect again, but...
On the 2nd Transfer Unit, there is Magenta depositing on the roller and piling on the metallic guide (SEE ATTACHED). To diagnose the issue, I swapped drums (old magenta drum with bad quality) and the problem still exists. I ruled out the drum and checked the Developer Unit. All looks fine there as well.
This was an issue I thought cured with the ITB not spewing toner through the cracks, but now Magenta is the only issue. The only other thing of note I think is the Magenta Drum doesn't seem to be evacuating the waste toner completely, maybe it's related?
Thanks!
Bookmarks