Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jul 2016
    Location
    Alabama
    Posts
    48
    Rep Power
    16

    1051 Putting lines on second side only

    As title suggests, when printing one side, the print is clean as a pin. When duplexing, lines appear at bottom of page (operator's side) in white area (see pics). When first seeing it, knee jerk conclusion was drum. But seeing it isn't marking on first side, it looks that it has to be something else. This is the first time I've encountered this oddity. Thoughts?

    SideA Clean.JPGSideBmarked.JPG

  2. #2
    Technician
    Join Date
    Jul 2016
    Location
    Alabama
    Posts
    48
    Rep Power
    16

    Re: 1051 Putting lines on second side only

    Update:
    The drum looks like hammered feces. Ruffles have ridges and so does the drum. 603,000 copies. I will replace drum when new one gets here before I go any further. We just ran 400 copies and lines now appear on both sides.

  3. #3
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,100
    Rep Power
    346

    Re: 1051 Putting lines on second side only

    Yes lines look like worn drum.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: 1051 Putting lines on second side only

    Replace the discharge wire and the drum cleaning brush to extend the drum life to avoid that.
    Whatever

  5. #5
    Technician
    Join Date
    Jul 2016
    Location
    Alabama
    Posts
    48
    Rep Power
    16

    Re: 1051 Putting lines on second side only

    Quote Originally Posted by allan View Post
    Replace the discharge wire and the drum cleaning brush to extend the drum life to avoid that.
    Discharge wire no doubt needs replacing. However, cleaning brush was replaced 200,000 copies ago.

  6. #6
    Senior Tech 250+ Posts
    1051 Putting lines on second side only


    Join Date
    Feb 2018
    Location
    *
    Posts
    306
    Rep Power
    24

    Re: 1051 Putting lines on second side only

    make sure the transfer cleaning brush gears aren't stripped, if they are good look at the condition of the transfer belt cleaning brushes and the transfer belt too.

  7. #7
    Senior Tech 250+ Posts
    1051 Putting lines on second side only

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside, CA
    Posts
    400
    Rep Power
    29

    Re: 1051 Putting lines on second side only

    Quote Originally Posted by cmitch View Post
    Discharge wire no doubt needs replacing. However, cleaning brush was replaced 200,000 copies ago.
    Also check the drive coupler and grounded bearing that drives the cleaning roller. It will wear down and cause excessive play and lack of ground to cleaning brush.

    A4EUR70F00 Cleaning Gear /2 Assy
    A0G6531500 Cleaning Bearing

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here