Good evening, has anyone ever changed the fuser swing unit or try to fix some parts on it ? there is no procedure to do this ...
Good evening, has anyone ever changed the fuser swing unit or try to fix some parts on it ? there is no procedure to do this ...
According to the manual there are factory adjustments to the fuser swing unit that cannot be duplicated in the field. Why do you need to change it?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
All that I can suggest to you is to carefully scribe & mark each of the slotted adjustments and attempt to reposition the new part in the exact same place. I'm assuming it's the alignment of the fuser in the paper path that's critical, but there may be additional reasons for the adjustments.
Watch for wrinkling of the paper & paper skew (especially second side).
I'll be interested in the results. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi, hope, it's help.
Bookmarks