Thanks: 
Likes: 
Dislikes: Gentlemen
Customer does not want it on his machine. I don't know how to disable it. I've read if I remove the UK-204 I'll get a service code.
Any help would be greatly appreciated.
Gentlemen
Customer does not want it on his machine. I don't know how to disable it. I've read if I remove the UK-204 I'll get a service code.
Any help would be greatly appreciated.
Disable the LK in the licence management server following the steps to remove it off the machine also - keep the token code once released and use it on another machine.Originally Posted by adecanmin
Once the LK is removed you can remove the additional ram which is mandatory for the licence kit.
[QUOTE=EarthKmTech;2215394]Disable the LK in the licence management server following the steps to remove it off the machine also - keep the token code once released and use it on another machine.
Once the LK is removed you can remove the additional ram which is mandatory for the licence kit.[/QUOTE
I saw the procedure for installing a license. I don't see the steps to remove it. I read on this site that I may need a license release code? These techs were getting a license management error. I bought the machine used. Never noticed the OCR function until the customer complained about it.
you need to disable it here before you remove the UK204:
License Management System
Last edited by Kenny; 09-26-2022 at 09:52 AM.
Ok.
Thanks
Pardon my ignorance. I'm assuming that screen is on the copier not the interface. Do I need to have Marketplace installed to access it? Up to this point I have not been able to see the screen shot you sent me
What i have attached is a weblink to the site LMS (license management system) you will have to create an account to access it, it does specify in the manual on the exact procedure
Great. Thanks
You could try the following link as well. It is also a link to the LMS (License Management Service). This link recognizes my Konica login credentials, whereas the previously provided link does not for whatever reason.
LINK REDACTED as it would not function without my KM user credentials being embedded into the URL.
Last edited by femaster; 09-26-2022 at 06:29 PM. Reason: Removed non-functioning link.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
The link did not work for me
Server Error in '/Licensebus' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /licensebus/km/LoginErrorPage.aspx
Reply With Quote
Bookmarks