Thanks: 
Likes: in Konica Minolta C458 getting continuous Humming/Whistle Noise.
Even the front and side doors are open and machine is not functioning. Is it from power supply? or another card.
Kindly advise.
Thanks and kind regards,
mearmi
Dislikes: 0
in Konica Minolta C458 getting continuous Humming/Whistle Noise.
Even the front and side doors are open and machine is not functioning. Is it from power supply? or another card.
Kindly advise.
Thanks and kind regards,
mearmi
Not much is on and little output from power supply with doors open. If happening when doors open then I would look at a fan making noise.Originally Posted by mearmi
I'm with the previous answer, I've had to replace several fans for noise, down by the power supply. Reasonably easy to get to.
OC
My vote goes to PS.
See this thread Bizhub C308 Power Supply Humming Noise - Fuser
Last poster has some interesting ideas
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Is it similar to a coil whine? 454s had this issue, a board on the upper rear of the machine. I suspect because they were initially designed for 20a but then dropped to 15a, as it only affected the 454s but never fully looked into it. Might be the same for the 458.
Posting Permissions
Reply With Quote
Bookmarks