Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Sep 2017
    Location
    singapore
    Posts
    40
    Rep Power
    14

    PF601 top drawer stuck !! how to open

    i have a km c7000 with a pf601 feeder. The top drawer upon squeezing the handle to open the drawer does not have the "click" sound, and the drawer cannot be pulled out. Is there a way to trigger that mechanism so i can open the drawer ?

    Or am i looking at a replacement pf601 unit ?

  2. #2
    Master Of The Obvious 10,000+ Posts
    PF601 top drawer stuck !! how to open

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: PF601 top drawer stuck !! how to open

    If you open the small door to the left of the paper feed unit, you'll see a couple of 1/2" round holes through the frame at your right. If you reach a finger through the hole and press the lever, the drawer will release. There is a hole for each drawer, each release lever.

    LOL! Take care reaching through that hole: the metal frame is often quite sharp and may leave you bleeding. I was a tiny bit surprised the first time. =^..^=

    Tray Realease.jpg
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Sep 2017
    Location
    singapore
    Posts
    40
    Rep Power
    14

    Re: PF601 top drawer stuck !! how to open

    Awesome poking the hole it works !!!

    so I am running jobs again from that drawer albeit manual opening by stuffing my finger into the hold (sounds bad) to open the drawer.

    is this fixable ? Or I need to get another pf601 or Lu202

  4. #4
    Technician
    Join Date
    Sep 2017
    Location
    singapore
    Posts
    40
    Rep Power
    14

    Re: PF601 top drawer stuck !! how to open

    Quote Originally Posted by blackcat4866 View Post
    If you open the small door to the left of the paper feed unit, you'll see a couple of 1/2" round holes through the frame at your right. If you reach a finger through the hole and press the lever, the drawer will release. There is a hole for each drawer, each release lever.

    LOL! Take care reaching through that hole: the metal frame is often quite sharp and may leave you bleeding. I was a tiny bit surprised the first time. =^..^=

    Tray Realease.jpg
    I am not a tech I am a print shop operator with this machine.

    I do have manuals for the main print engine but not for the feeder units.

  5. #5
    Master Of The Obvious 10,000+ Posts
    PF601 top drawer stuck !! how to open

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: PF601 top drawer stuck !! how to open

    I am going to assume that the lift plate drops back down when you open the tray, as you're able to load and continue to use the tray.

    There certainly is no harm in continuing to use the release-hole to open the tray. Those trays have a momentary switch that operates a solenoid to release the tray. I think it's unlikely that the solenoid has any issue, since it's used so infrequently. More likely there is a disconnection in the wiring or the switch on the front cover of the drawer is worn out.

    Were it me, I'd remove the front cover of the tray and examine the wiring to the switch, wiring to the solenoid, and check the physical connections. If there are no apparent flaws I'd take an ohm-meter to check that the switch closes when the handle is pulled. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    Sep 2017
    Location
    singapore
    Posts
    40
    Rep Power
    14

    Re: PF601 top drawer stuck !! how to open

    Quote Originally Posted by zubinn View Post
    I am not a tech I am a print shop operator with this machine.

    I do have manuals for the main print engine but not for the feeder units.
    Oh.. Front... I took off the back cover many screws saw nothing.

    Where are the screws on the front, I thought they may be behind the stickers saying what drawer it is, but I got nothing.

    I will try and learn from you guys. Please let me know how to remove the covers of the drawers!!

  7. #7
    Master Of The Obvious 10,000+ Posts
    PF601 top drawer stuck !! how to open

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: PF601 top drawer stuck !! how to open

    When you release the tray, you'll see three screws along the top edge of the tray that secure the front to the cassette base. There are also two screws on each side that hold the front on. Remember that there is a wiring harness attached to the front cover. Be gentle, so the wiring is not damaged. You'll have to unplug the connector to the switch (if it isn't unplugged already).
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here