Transfer belt blades?

[mrfuser]

Does anyone have a source on the cleaning blades for the transfer belt assemblies on the C364 and “4” series in general?

[copyman]

Does anyone have a source on the cleaning blades for the transfer belt assemblies on the C364 and “4” series in general?

Copylite & Katun

I've used the aftermarket belts & blades to rebuild the transfer units many times and have worked well. The belt & blade is same for the C224 to C554. Also same for "i" & "8" series.

here is link for copylite: Copylite - Aftermarket, Compatible, and OEM Copier Supplies and Products

[mrfuser]

Funny I buy from both and never have seen those but copylite had them! Thanks!

[Oystercopy]

I've been buying my belts and blades from eBay. Seem to be working out good.
OC

[copier tech]

The blades are only a temporary fix as once the belt is worn you'll still get lines.

[mrfuser]

True, most of my clients are low volume so they last a good while. Thanks again!

[rrrohan]

Didnt KM recently make the cleaning unit on belt a assembly you can order in?

Sent from my Pixel 4 XL using Tapatalk