Oddly enough it still looked like a good blk. I had inmates put ricoh toner in and the dev unit looked good
Oddly enough it still looked like a good blk. I had inmates put ricoh toner in and the dev unit looked good
Hello,
today we checked dev unit and all seems ok, gears are in good condition and developer roller turning smoothly. We found that charge on the corona grid is not ok, must be 700-800V, ours is around 200V , all cables for high voltage are checked and all is ok with them too. So we think that something is wrong with HV1 board.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Whatever
Yes, that is really strange.
Did you try to stop machine during printing and check image on drum is it also faded same as on paper?
Seems HV1 board is defect, high voltage to charge corona and DV unit is under normal values. Any HV1 for selling?
Bookmarks