Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: press c1200

  1. #1
    Senior Tech 100+ Posts
    press c1200

    romario's Avatar
    Join Date
    Jun 2020
    Location
    ESPAŅA
    Posts
    146
    Rep Power
    10

    press c1200

    hello group, someone with experience in press c12000, I have this problem when printing paper size 33x900 the part of the print queue moves, change second transfer, registration unit, paralyze the copy before it went to transfer and notice that the paper enters perfect to the registration unit and the image on the transfer belt is perfectly aligned without warping. here attached image for you to see

    on paper size 33x48 it still comes out deformed but minimal, while the paper is longer you don't notice the fault anymore, on paper from 90 grams to 200 grams they come out fine, the fault is noticeable in 250 grams to 400 grams

























    Attached Images Attached Images






    thanks






  2. #2
    Certified Konica Expert 2,500+ Posts
    press c1200

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,988
    Rep Power
    217

    Re: press c1200

    what is 33x900? thats 1.3" x 3' thats a ribbon.
    anyway, i would first run the both sides adjustment in the manual.
    its under image position adjustment.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Senior Tech 100+ Posts
    press c1200

    romario's Avatar
    Join Date
    Jun 2020
    Location
    ESPAŅA
    Posts
    146
    Rep Power
    10

    Re: press c1200

    Quote Originally Posted by Synthohol View Post
    what is 33x900? thats 1.3" x 3' thats a ribbon.
    anyway, i would first run the both sides adjustment in the manual.
    its under image position adjustment.
    excuse me 33cm x 900cm banner. all centering adjustments both sides have been made






    thanks






  4. #4
    Field Supervisor 500+ Posts
    press c1200

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: press c1200

    Quote Originally Posted by romario View Post
    hello group, someone with experience in press c12000, I have this problem when printing paper size 33x900 the part of the print queue moves, change second transfer, registration unit, paralyze the copy before it went to transfer and notice that the paper enters perfect to the registration unit and the image on the transfer belt is perfectly aligned without warping. here attached image for you to see

    on paper size 33x48 it still comes out deformed but minimal, while the paper is longer you don't notice the fault anymore, on paper from 90 grams to 200 grams they come out fine, the fault is noticeable in 250 grams to 400 grams



    If you confirm that the paper arrives correctly in the register, the problem is in the writing. (Remember that there is mechanical positioning).

    If you confirm that the writing is correct on the transfer belt, the problem should be with the paper.


    Something is happening and you haven't noticed.


    If centering adjustments are all ok, try performing Belt Line Speed and Skew Adjustment.


    Test the 13'x19' in other trays and compare if the error is the same as in the banner tray.


    You said that at lower weights, it appears less.
    Have you tried to print 250 gm banner as 75 gm and see how it looks?


    Something different has to show
    Nothing like day after day

  5. #5
    Senior Tech 100+ Posts
    press c1200

    romario's Avatar
    Join Date
    Jun 2020
    Location
    ESPAŅA
    Posts
    146
    Rep Power
    10

    Re: press c1200

    Quote Originally Posted by tulintron View Post
    If you confirm that the paper arrives correctly in the register, the problem is in the writing. (Remember that there is mechanical positioning).

    If you confirm that the writing is correct on the transfer belt, the problem should be with the paper.


    Something is happening and you haven't noticed.


    If centering adjustments are all ok, try performing Belt Line Speed and Skew Adjustment.


    Test the 13'x19' in other trays and compare if the error is the same as in the banner tray.


    You said that at lower weights, it appears less.
    Have you tried to print 250 gm banner as 75 gm and see how it looks?


    Something different has to show
    hello. If I went back to the client and checked the fault, I get from 90 grams to 400 grams, size 33cm x 90 cm in 13x19, it also moves butt, the iq corrects, but in 33cm x 90cm it doesn't correct anymore because the displacements are a lot this week I'm going to change the unit transfer. and I will tell you.






    thanks






Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here