Hello.. the adf is outputting multiple sheets of paper together while copying bizhub 754e..
I changed the upper and lower pulleys but no change... Please what is the solution..
Hello.. the adf is outputting multiple sheets of paper together while copying bizhub 754e..
I changed the upper and lower pulleys but no change... Please what is the solution..
You can try and mod the exit area with some sort of "feeler" hanging from the top but it probably won't help if the originals are too "wobbly".
Another thing you can try is to scan the originals SEF and see if this works better.
I don't know if KM offers some sort of "silent" mode to reduce the speed wich probably would help reducing your issue.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
There is a pressure adjustment that has like 3 settings or continuous on some you can play with too. The sheet metal in that area can bend, that will give you endless hell.
Whatever
Where are these boards that I can bend in that area? Can I have a picture please
The metal plate the separation assy is mounted too. No images can not help you with that.
Whatever
Bookmarks