Dislikes: 0
I installed a new SSD in a C224e. In the absence of installation instructions, of course, cyan and magenta lines. Installation instructions are now available. How do I proceed? Have I tried deleting and reinstalling again with reset tool without success? The serial numbers, for example, have remained. Thanks in advance!
Do Stop + 3 setup...
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
you are a contributor, just ask for them next timeOriginally Posted by CP-1015
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
I Used To Live To Fix Things Now i Fix Things To Live
I did: Stop - 1 - 1 - 4 - 4 - c. Was it wrong? I thougt Stop + 3 is for 8-series?
Last edited by CP-1015; 11-16-2022 at 04:38 PM.
Ok, netxt time. But how I have to reset before insatll procedere after my foult? I tried with reset tool again, but it wasn't successfull. For excample serial numbers aren't deleted.you are a contributor, just ask for them next time
Last edited by CP-1015; 11-16-2022 at 04:48 PM.
Did you update firmware after SSDB replacement?
Enter service mode and press stop and 3 to start initial setup of date and time etc.
P.S. As I'm comparatively freshman with KM I never installed brand new 4e series machine so I may be mistaken about initial setup. Just try.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
OK, I'l try it today.
Perfect! Thanks everyone! Firmware I datet up for start after SSD replacement.
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks