It's a new BH226i MFP. Checked the Scanner Harness. Found OK. in Scan/Copy there is Overlapping in the left side. Need help and suggestion. Please find the attached Photographs of the original and copy output. Same thing happens in case of Scan also.
Subhash Chandra Kalita.
Check drum unit and maybe transfer belt
Thanks for your reply. But the problem occurs in scanning also. Normal print from PC is OK. Counter Print List / Demo Page is OK.Originally Posted by techsxge
Please....anyone to provide solution or any hints to resolve the problem.
clean scanner unit and scanner glass?
Clearly, it's an image processing error of some sort. I've seen this exact sort of defect on the PRESS 1052, which uses an LED exposure/printhead.
Most likely, there is not anything mechanically wrong with the scanner, it's the electronic image processing that is creating this fault. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
you are right, must be some sort of "software" or eletronic issue. Maybe update firmware?
Thanks a lot for your valuable input. I'll check and confirm.
Thanks a lot for your valuable input. I'll check and confirm.
Unfortunately this is low end KM B&W A3 lineup.
Still POS.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks