Hello all ,
I have a print shop, where I have C8000, C1060, C1070, 2 x C1100 Black, C954.. I would like to inquire where I can find online training or courses on maintenance and changing parts on these type of machines. I dont mind if it is paid.
Hello all ,
I have a print shop, where I have C8000, C1060, C1070, 2 x C1100 Black, C954.. I would like to inquire where I can find online training or courses on maintenance and changing parts on these type of machines. I dont mind if it is paid.
Your best bet is probably to get a manual and dig in. Training courses are for techs that work for an authorized dealer. Good luck.
PS - Any questions you have about working on a copier can be answered by one of the knowledgeable techs on this site. Lord knows I asked a million questions.
Growth is found only in adversity.
It's too bad that you're not closer. I think I might enjoy such a task. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
There are quite a few Youtube Videos out there. Maybe not for your exact machine but if you are not left handed and have some technical understanding i recon you can do much of it yourselve. Takes some time of course.
Get ready to cost yourself a ton of money. It took me 5 years of full time work to feel confident on the production machines in high stakes environments.
Pay for a technician. The machines you have is worth that.
Whatever
Bookmarks