Hello,
Several bizhub C250i sometimes have fusing problem, toner cannot fixed on paper.
check the unit is ok, increased fusing temp. but no luck
replace new unit solve it, what reason cause this?
F/W G00-J9
Fuser life more than 70%
Hello,
Several bizhub C250i sometimes have fusing problem, toner cannot fixed on paper.
check the unit is ok, increased fusing temp. but no luck
replace new unit solve it, what reason cause this?
F/W G00-J9
Fuser life more than 70%
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Not sure for this model but there is firmware for the 8 series addressing this issue mostly for 1st page after coming out of sleep mode.
Have you gone into the service mode and increased the fusing temp?
Aftermarket toner?
I've had that problem a couple of times on a C250i and I'm trying to get it from KM under warranty.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks