Thanks: 0
Likes: 0
Dislikes: 0
Customer bought this machine online with numerous finishing options. The manual does not list which order to set them up. They are currently set up in this order after the main body: RU-518, IQ-501, RU-510, GP2, RU-510, LS-506, SD-506, and FS-532. It shows the first 3 options and then nothing after that. Does anyone know if this is the correct order and something not plugged in or if this order is incorrect?
I've never tried to string all these finishing options together.
Does your manual page look like this?: =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I saw a different page but similar. According to this I should have the accessories in the correct order. Must have at least the GP-2 not connected properly.Originally Posted by blackcat4866
Let us know what you find. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Was able to get the machine to recognize all of the components except it is showing Please confirm power cord and door of RU. I am assuming it’s referring to the 3rd RU in line since that is the one that doesn’t have any movement when the door is opened and closed, but still recognizes the components past it. Everything is plugged in (no power cord).
There is a suspicion that the RU-510 after G2 is superfluous
And we need 2 MK-737
There are 2 MK-737 installed. Now I am confused. according to the main manual a RU-510 would be installed after G2, but according to these installation instructions there is no RU-510 installed after. It would just be the next component, which in this case would be the LS-506.
more or less like this
Thanks, that was it! Just needed to remove that 3rd RU. Now just need to figure out the jamming issue in the LS
Reply With Quote
Bookmarks