hello,
BizHub C227 not prints colors 5, 10, 20% in demo page. Image appears very bright.
SKM_C227221221180401.jpg
Any ideas how solve this problem?
hello,
BizHub C227 not prints colors 5, 10, 20% in demo page. Image appears very bright.
SKM_C227221221180401.jpg
Any ideas how solve this problem?
What have you done so far?
Looks a lot like an end user.
New account, first post, extremely basic issue.
Bird looks awful what have you done to it?
Readitlikeweneedmoreinfo.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Every couple months appears streaks on paper, after clean transfer belt everything works fine, but after last cleaning lost low intensity colors.
Looks like waste toner not transfer to waste toner box. So why I often cleaning transfer belt, actually cleaning this part Capture.JPG
reset background data & stabilize,
then stabilize and gradations 3x each.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
That cleaning blade of the ITB is probably too old so cleaning won't last long. You can buy these blades from some non OEM part suppliers to avoid swapping entire ITB units at service contract MFPs but I don't have any long time experience so far. Resetting stabilizing data and run a freh stabilization might help - I'd clean the AIDC sensores before that procedure though.
As Synthohol stated, run the gradation per the instructions given and it should greatly improve your issue. Depending on consumable wear, it may not end up perfect, but should be a whole lot better than what you have now.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Thanks all for advices.
Initialize+Image Stabilization helped
Bookmarks