Fiery E100-02 IC-413 For KM Bizhub Press C7000P

[Danny9279]

I recently purchased the KM C7000P from an auction house. They did state that the Fiery had an error that wasn't figured out. When I turn it on and let it run the LED display on the Fiery shows AA. I tried looking for the solution and the best I found is a User Manual for the Fiery E100-02 with the trouble codes. As for AA it doesnt show anything except the following:

Symptom
Any other code that the system hangs on before reaching the idle state Possibly one of the following:

Possible Cause
• Corrupted BIOS settings on the motherboard
• Faulty motherboard

Suggested action
1. Clear the CMOS (see page 57).
2. Make sure that you reseated the internal cable connections and verified
system components.
3. Replace the motherboard


Im thinking of replacing the motherboard with a spare I have on hand. Will I have to reimage the HDD?

[tulintron]

I recently purchased the KM C7000P from an auction house. They did state that the Fiery had an error that wasn't figured out. When I turn it on and let it run the LED display on the Fiery shows AA. I tried looking for the solution and the best I found is a User Manual for the Fiery E100-02 with the trouble codes. As for AA it doesnt show anything except the following:

Symptom
Any other code that the system hangs on before reaching the idle state Possibly one of the following:

Possible Cause
• Corrupted BIOS settings on the motherboard
• Faulty motherboard

Suggested action
1. Clear the CMOS (see page 57).
2. Make sure that you reseated the internal cable connections and verified
system components.
3. Replace the motherboard


Im thinking of replacing the motherboard with a spare I have on hand. Will I have to reimage the HDD?

It is certain that your OS has become corrupted. Need to reinstall OS Fiery.

[Synthohol]

a corrupt OS will cause AA.
replace the HDD and run system software install.

[tulintron]

a corrupt OS will cause AA.
replace the HDD and run system software install.

Looks like you already helped him yesterday. I arrived late.

[Danny9279]

Replaced the Hdd and ran the install. When starting up it runs fine upto the start up screen with the Win XP logo, after this it's just black screen and a 02 code on the LED. I have a spare PC that I'm going to runthe install on and see if it runs without issues.

[tulintron]

Replaced the Hdd and ran the install. When starting up it runs fine upto the start up screen with the Win XP logo, after this it's just black screen and a 02 code on the LED. I have a spare PC that I'm going to runthe install on and see if it runs without issues.

Is it running OS over USB?

[Synthohol]

unless there was a FACI kit then yes after the XP logo it is supposed to go blank.
it can take half an hour for it to fully install and go to 00
which method did you use? network or USB?

[Danny9279]

unless there was a FACI kit then yes after the XP logo it is supposed to go blank.
it can take half an hour for it to fully install and go to 00
which method did you use? network or USB?

I used the USB method. I left it running all night and this morning it was still 02 error code on the LED.

I apologize ahead of time, what is a FACI Kit?

[Danny9279]

Is it running OS over USB?

I installed directly to the HDD using USB method

[Synthohol]

for 20+ years i have always used the crossover cable method.
this way i can watch the progress of the install and it just works everytime.
dont forget to move the 2 service switches for this and moved back when install complete.

i mount the .iso with PowerIso and run the installer.vbs file and follow the prompts.
with todays network cards you dont even need a crossover, straight cable will figure it out itself.