Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. 03-16-2023 #1
    techsxge
    techsxge is offline
    Field Supervisor 500+ Posts
    About Reset Tools

    techsxge's Avatar
    Join Date
    Jan 2022
    Location
    N/A
    Posts
    661
    Rep Power
    28

    About Reset Tools

    Hi,

    i've stumbled across a few posts by now stating that there are no known reset tools for newer machines.
    Because i was bored a bit today i decided to take a look into it
    I've extracted the tar files content and checked it for any difference.

    For your understanding, i'll share the content of all INDEX Files inside the tar:

    A145FW.tar


    @WVU
    @TYP=GaiaPF
    @VER=A0P00Y0-F000-F00-07(00)
    @RGA=FF87C436DCFB428074C76B335F2D9E4326099761390D0 5B7E5D80A01F8330D79
    @SID=0,ID=000001,NM=000002,OP=0
    @MAT=0,ID=000003,NM=000002,OP=0
    @BST=0,ID=000005,NM=000002,OP=0
    @OAT=0,ID=000007,NM=000002,OP=0
    @LDR=0,ID=000018,NM=000002,OP=0
    @STP=0,ID=000020,NM=000020,OP=0
    @MS1=0,ID=000062,NM=000036,OP=1
    @MS2=0,ID=000098,NM=000036,OP=0
    @MSC=0,ID=000134,NM=000120,OP=1
    @MSG=0,ID=000254,NM=000120,OP=0
    @AP0=0,ID=000374,NM=000026,OP=1
    @AP1=0,ID=000400,NM=000060,OP=1
    @AP2=0,ID=000460,NM=000020,OP=1
    @AP3=0,ID=000480,NM=000016,OP=1
    @AP4=0,ID=000496,NM=000024,OP=1
    @IBR=0,ID=000520,NM=000028,OP=1
    @IID=0,ID=000548,NM=000003,OP=1
    @IPF=0,ID=000551,NM=000006,OP=1
    @IMY=0,ID=000557,NM=000014,OP=1
    @FO1=0,ID=000571,NM=000020,OP=1
    @FO2=0,ID=000591,NM=000032,OP=1
    @FO3=0,ID=000623,NM=000160,OP=1
    @BS1=0,ID=001012,NM=000005,OP=0
    @BS2=0,ID=001017,NM=000005,OP=0
    @MA1=0,ID=001022,NM=000001,OP=0
    @MA2=0,ID=001023,NM=000001,OP=0
    @END


    A61FFW.tar
    @WVU
    @TYP=ZeusBK
    @VER=A0P00Y0-F000-F00-07(00)
    @RGA=FF87C436DCFB428074C76B335F2D9E4326099761390D0 5B7E5D80A01F8330D79
    @SID=0,ID=000001,NM=000002,OP=0
    @MAT=0,ID=000003,NM=000002,OP=0
    @BST=0,ID=000005,NM=000002,OP=0
    @OAT=0,ID=000007,NM=000002,OP=0
    @LDR=0,ID=000018,NM=000002,OP=0
    @STP=0,ID=000020,NM=000020,OP=0
    @MS1=0,ID=000062,NM=000036,OP=1
    @MS2=0,ID=000098,NM=000036,OP=0
    @MSC=0,ID=000134,NM=000120,OP=1
    @MSG=0,ID=000254,NM=000120,OP=0
    @AP0=0,ID=000374,NM=000026,OP=1
    @AP1=0,ID=000400,NM=000060,OP=1
    @AP2=0,ID=000460,NM=000020,OP=1
    @AP3=0,ID=000480,NM=000016,OP=1
    @AP4=0,ID=000496,NM=000024,OP=1
    @IBR=0,ID=000520,NM=000028,OP=1
    @IID=0,ID=000548,NM=000003,OP=1
    @IPF=0,ID=000551,NM=000006,OP=1
    @IMY=0,ID=000557,NM=000014,OP=1
    @FO1=0,ID=000571,NM=000020,OP=1
    @FO2=0,ID=000591,NM=000032,OP=1
    @FO3=0,ID=000623,NM=000160,OP=1
    @BS1=0,ID=001012,NM=000005,OP=0
    @BS2=0,ID=001017,NM=000005,OP=0
    @MA1=0,ID=001022,NM=000001,OP=0
    @MA2=0,ID=001023,NM=000001,OP=0
    @END


    A55VFW.tar
    @WVU
    @TYP=MinervaBK
    @VER=A0P00Y0-F000-F00-07(00)
    @RGA=FF87C436DCFB428074C76B335F2D9E4326099761390D0 5B7E5D80A01F8330D79
    @SID=0,ID=000001,NM=000002,OP=0
    @MAT=0,ID=000003,NM=000002,OP=0
    @BST=0,ID=000005,NM=000002,OP=0
    @OAT=0,ID=000007,NM=000002,OP=0
    @LDR=0,ID=000018,NM=000002,OP=0
    @STP=0,ID=000020,NM=000020,OP=0
    @MS1=0,ID=000062,NM=000036,OP=1
    @MS2=0,ID=000098,NM=000036,OP=0
    @MSC=0,ID=000134,NM=000120,OP=1
    @MSG=0,ID=000254,NM=000120,OP=0
    @AP0=0,ID=000374,NM=000026,OP=1
    @AP1=0,ID=000400,NM=000060,OP=1
    @AP2=0,ID=000460,NM=000020,OP=1
    @AP3=0,ID=000480,NM=000016,OP=1
    @AP4=0,ID=000496,NM=000024,OP=1
    @IBR=0,ID=000520,NM=000028,OP=1
    @IID=0,ID=000548,NM=000003,OP=1
    @IPF=0,ID=000551,NM=000006,OP=1
    @IMY=0,ID=000557,NM=000014,OP=1
    @FO1=0,ID=000571,NM=000020,OP=1
    @FO2=0,ID=000591,NM=000032,OP=1
    @FO3=0,ID=000623,NM=000160,OP=1
    @BS1=0,ID=001012,NM=000005,OP=0
    @BS2=0,ID=001017,NM=000005,OP=0
    @MA1=0,ID=001022,NM=000001,OP=0
    @MA2=0,ID=001023,NM=000001,OP=0
    @END




    What we notice here is the following:
    TYP= is different for all tools. But except for some greek gods i was not able to find anything about those Names on the internet.
    I am currently going through firmware and moviedata files to find the TYP= definition. My hope is to be able to take/modify this part and insert it in firmware of newer i-models for example.
    As the settings are all pretty much the same over multiple series, i only slightly doubt that they changed. However, it is very likely that the values or whole procedure changed as konica did not bother to make a new tool yet.
    As a field tech, it would be nice to have it on a stick though.

    I'll post news about this as soon as i get them.
    If anyone got more information especially on the TYP= please share it with me
    Reply With Quote Reply With Quote
  2. 03-16-2023 #2
    B0265
    B0265 is offline
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    714
    Rep Power
    47

    Re: About Reset Tools

    The reset tool for the IT5 (”8”) series works also for the IT6 (”i”) models.
    Reply With Quote Reply With Quote
  3. 03-16-2023 #3
    blackcat4866
    blackcat4866 is offline
    Master Of The Obvious 10,000+ Posts
    About Reset Tools

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: About Reset Tools

    Those are Series Names or Family Names.

    Minerva 0Bk is a bizhub 754
    Minerva 1Bk is bizhub 654

    ZeusS BK1st is bizhub 308, 368, 458, 558
    ZeusS BK2nd is bizhub 308e, 368e, 458e, 558e, 658e


    The A145FW.tar file is for the bizhub C754 (Minerva 0)/C754e/C654 (Minerva 1)/C654e/C554 (Zeus X)/C554e
    /C454 (Zeus 0)/C454e (Zeus0 MLK)/C364 (Zeus 1)/C364e (Zeus1 MLK)/C284 (Zeus 2)/C284e (Zeus2 MLK)/C224 (Zeus 3)/C224e (Zeus3 MLK).
    I don't have a reference for: GaiaPF ... so I cannot offer you a suggestion as how to edit that series name.

    Gaia is the Earth Goddess or an AlphardI Gaia (Kyocera KM-3500i, KM-4500i, KM-5500i).

    This is only interesting trivia ... probably won't help you with your task. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Reply With Quote Reply With Quote
  4. 03-17-2023 #4
    Hansoon
    Hansoon is offline
    Service Manager 2,500+ Posts
    About Reset Tools

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,200
    Rep Power
    95

    Re: About Reset Tools

    Because i was bored a bit today i decided to take a look into it
    Thanks.
    Great, when you are bored from time to time...... lol

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "
    Reply With Quote Reply With Quote
  5. 03-17-2023 #5
    techsxge
    techsxge is offline
    Field Supervisor 500+ Posts
    About Reset Tools

    techsxge's Avatar
    Join Date
    Jan 2022
    Location
    N/A
    Posts
    661
    Rep Power
    28

    Re: About Reset Tools

    Quote Originally Posted by blackcat4866 View Post
    Those are Series Names or Family Names.

    Minerva 0Bk is a bizhub 754
    Minerva 1Bk is bizhub 654

    ZeusS BK1st is bizhub 308, 368, 458, 558
    ZeusS BK2nd is bizhub 308e, 368e, 458e, 558e, 658e


    The A145FW.tar file is for the bizhub C754 (Minerva 0)/C754e/C654 (Minerva 1)/C654e/C554 (Zeus X)/C554e
    /C454 (Zeus 0)/C454e (Zeus0 MLK)/C364 (Zeus 1)/C364e (Zeus1 MLK)/C284 (Zeus 2)/C284e (Zeus2 MLK)/C224 (Zeus 3)/C224e (Zeus3 MLK).
    I don't have a reference for: GaiaPF ... so I cannot offer you a suggestion as how to edit that series name.

    Gaia is the Earth Goddess or an AlphardI Gaia (Kyocera KM-3500i, KM-4500i, KM-5500i).

    This is only interesting trivia ... probably won't help you with your task. =^..^=
    This i actually good information to confirm what i suspected, thanks.
    I still need to find where it is located in firmware/software of the MFPs so i can work out a patch for it.
    Thanks for the information, it is very usefull


    Luckily Konica Made all their stuff opensource

    Opensource | KONICA MINOLTA
    Reply With Quote Reply With Quote
  6. 03-17-2023 #6
    jotunn
    jotunn is offline
    Senior Tech 250+ Posts jotunn's Avatar
    Join Date
    Jan 2010
    Posts
    427
    Rep Power
    51

    Re: About Reset Tools

    Kids, you are going to hurt yourselves... but even worse, you are going to hurt others as well.

    techsxge, you shouldn't and I shouldn't too...

    @TYP=GaiaPF
    @TYP=ZeusSoC - C224e
    @TYP=ZeusBK - BH224e-BH554e
    @TYP=Minerva2nd -
    @TYP=MinervaBK - BH654e
    @TYP=MinervaSBK - BH758
    @TYP=M_BK_2nd - BH654e
    @TYP=Zeus5BK - BH227, BH368, BH458, BH758
    @TYP=_ZeusSBK_12_PF - BH368
    @TYP=Helios - C227
    @TYP=HeliosMLK - C287i
    @TYP=ZeusS - C227, C308
    @TYP=Z_S - C308
    @TYP=Eagle_12 - C250i, C287i
    @TYP=SparrowMFP_12 - C4050i/C3350i/C3320i
    @TYP=SparrowAIO2_SFP12 - C3320i/C4000i/C3300i
    Last edited by jotunn; 03-17-2023 at 01:32 PM.
    Reply With Quote Reply With Quote
  7. 03-17-2023 #7
    blackcat4866
    blackcat4866 is offline
    Master Of The Obvious 10,000+ Posts
    About Reset Tools

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: About Reset Tools

    Quote Originally Posted by jotunn View Post
    Kids, you are going to hurt yourselves... but even worse, you are going to hurt others as well.

    techsxge, you shouldn't and I shouldn't too...

    @TYP=GaiaPF
    @TYP=ZeusSoC - C224e
    @TYP=ZeusBK - BH224e-BH554e
    @TYP=Minerva2nd -
    @TYP=MinervaBK - BH654e
    @TYP=MinervaSBK - BH758
    @TYP=M_BK_2nd - BH654e
    @TYP=Zeus5BK - BH227, BH368, BH458, BH758
    @TYP=_ZeusSBK_12_PF - BH368
    @TYP=Helios - C227
    @TYP=HeliosMLK - C287i
    @TYP=ZeusS - C227, C308
    @TYP=Z_S - C308
    @TYP=Eagle_12 - C250i, C287i
    @TYP=SparrowMFP_12 - C4050i/C3350i/C3320i
    @TYP=SparrowAIO2_SFP12 - C3320i/C4000i/C3300i

    Please excuse me for recognizing a missing piece: How should the .tar file be named, to be properly recognized by the specific model?

    (And thank you for information. I promise only to harm myself with this information.) =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Reply With Quote Reply With Quote
  8. 03-17-2023 #8
    emujo2
    emujo2 is online now
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,572
    Rep Power
    73

    Re: About Reset Tools

    Luckily, for the most part updating firmware, reset files, LDD, movie data, it's all "Sailor Proof". I'm sure you will find a way to brick your machine before too long. I can't wait for the "can anyone help me fix this tragic accident?????"
    Reply With Quote Reply With Quote
  9. 03-17-2023 #9
    tulintron
    tulintron is offline
    Field Supervisor 500+ Posts
    About Reset Tools

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32
    About Reset Tools

    Re: About Reset Tools

    Jotunn is right about the models. The gods set the models.


    But opening an index file in Notepad doesn't show what it is capable of doing.


    If you open it in programming software, you'll see how much you've written and the infinite chances of going wrong if you don't know what to do
    Nothing like day after day
    Reply With Quote Reply With Quote
  10. 03-20-2023 #10
    techsxge
    techsxge is offline
    Field Supervisor 500+ Posts
    About Reset Tools

    techsxge's Avatar
    Join Date
    Jan 2022
    Location
    N/A
    Posts
    661
    Rep Power
    28

    Re: About Reset Tools

    Quote Originally Posted by emujo2 View Post
    Luckily, for the most part updating firmware, reset files, LDD, movie data, it's all "Sailor Proof". I'm sure you will find a way to brick your machine before too long. I can't wait for the "can anyone help me fix this tragic accident?????"
    I have a few machines dont are physically not able to print stuff anymore that i can use for some try & error.
    Anyways, as long as KM publishes their original os, you can almost all the time recover stuff
    Reply With Quote Reply With Quote
« how to active web browser C284e | Software SW No 231 (bit0) -new option »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here