ok so tray 1 is sus.
probably the one way clutch on the feed assy. the black ones that turn the feed and take-up rollers
clean the bearings and scuff the shaft where the needle bearings ride.
ok so tray 1 is sus.
probably the one way clutch on the feed assy. the black ones that turn the feed and take-up rollers
clean the bearings and scuff the shaft where the needle bearings ride.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
gotta be a c250 if the jam counters list by section instead of actual jam code.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Yes, it's an old printer and storage conditions have not been clean. I'll try to clean that clutch in the next day or two when I'm at the office. I guess there will have to be some disassembly to get to it, that's if I am reading the service manual correctly.
The issue with duplex printing is I suppose a second fault.
Bookmarks