Thanks: 
Likes: 
Dislikes: Any one know that how to reset this codes, after go trouble shooting but not reset and trouble code still showing.
Any one know that how to reset this codes, after go trouble shooting but not reset and trouble code still showing.
They are "abort" codesOriginally Posted by herath176
If it won't reset I would suspect a bad board in Doc feeder. If you have another machine I would swap whole doc feeder.
Since both codes show an issue with doc feeder I would disconnect & unset the the doc -feeder in service mode, then try and reset code.
Also try updating firmware or using reset tool as last resort, can't hurt.
C-FCAB code:
MFP board (MFPB)
• DSC board/1 (DSCB/1)
• DSC board/2 (DSCB/2)
• EFI relay board
(EFIRYB: VI-506)
• Dual scan image
processing board
(DSIPB)
C-FFCB Code:
MFP board (MFPB)
• DSC board/1 (DSCB/1)
• DSC board/2 (DSCB/2)
• Dual scan image
processing board
(DSIPB)
DS board JPEG watchdog timer error
bizhub 754e/654e K TROUBLESHOOTING > 4. ABORT CODE
K-
Perhaps unrelated, but I have changed a few dual scan boards and the associated cables. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Cat, agree the Duel scan pwb is very much related and one of the things I forgot to post.
Reply With Quote
Bookmarks