Fiery ic-413 crashes

[dami1405]

[QUOTE=Synthohol;2335629]5 minutes is normal.
the fiery wont take windows 7 without the bios and the memory upgrade usually.
how much ram is in the fiery? you can boost it to 8Gb (2x4) which will make it run much faster.
if still only 2Gb its slow no matter what ;')

one more question, what is the procedure for installing a new bios

[Synthohol]

you need a working fiery and you import the "patch" to the direct queue.

[dami1405]

you need a working fiery and you import the "patch" to the direct queue.

can i have more information i have a working rip,
which means you import the "patch" to the direct queue

[dami1405]

you need a working fiery and you import the "patch" to the direct queue.

ok i got it on xp ripu
ok i got it

[Synthohol]

sent you a PM

[dami1405]

sent you a PM

thank you
thank you

[dami1405]

When upgrading the frame, rip does not start, everything works as it should, 00 is on the display,
The question is whether the OS needs to be reinstalled to recognize 4 or 8 ram memories, I can't teach remote desktop because I don't know what the Fiery password Fiery. 1 doesn't go through

[peter42]

Try Fierz.1, depending on your connected Keyboard.

[dami1405]

Try Fierz.1, depending on your connected Keyboard.

It failed, it didn't

[dami1405]

1. installed the bios
2. replaced the 2x2 gb module
3. replaced hard with W7 sis 1.11
4. does not recognize rip on minolta
5. returned ram to 1x1 mb works
The question is whether the system needs to be reinstalled for more RAM or does it only work on 2 RAM memory,when booting, it correctly says that the bios recognized the memory and 2 ram and 4 gb

Can I have some help?