Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: BH 350

  1. #1
    Trusted Tech 50+ Posts fernan's Avatar
    Join Date
    Jan 2008
    Location
    philippines
    Posts
    61
    Rep Power
    34

    BH 350

    good day folks

    can anyone help me for this problem in ADF of KM BH350,last paper is always jammed,


  2. #2
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,716
    Rep Power
    134
    Need more info. When you say last page always jams, do you mean it sticks in the machine, or the machine spits it out and then shows a jam. Did you go into tech mode and test the exit photo cell to see if it is sticking? Look at the exit flag. Is it snapped into the slot correctly?
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

  3. #3
    Field Service Manager 1,000+ Posts
    BH 350

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,073
    Rep Power
    51
    Watch and see if it tries to feed another original after the last one has left the original tray, it may be that the original detec sensor is hung up or sluggish. What does the jam counter say?
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  4. #4
    Service Manager 1,000+ Posts
    BH 350

    brent's Avatar
    Join Date
    Nov 2008
    Location
    Kellogg Idaho
    Posts
    1,136
    Rep Power
    44

    df jams

    I have seen this happen before. if you go in and take apart the df rollers and replace them. then you go and put that inner cover back in place. it is very easy to not put the sensor actuator back into the original place. it all appears to be ok and will feed just normal until the last sheet exits. then the df is looking for the next original and there is none. then it jams. anyways if your flag. (actuator) broke or is not in the right position fix it and you will be fine.. I have been there. you almost need another machine right next to you to compare. easy to get put into the wrong spot..

    brent

  5. #5
    Technician
    Join Date
    Jan 2009
    Location
    Lisbon
    Posts
    17
    Rep Power
    31
    Hi , try to adjust the DF sensors with a instruction manual., like installed a new one....

  6. #6
    Technician
    Join Date
    Dec 2008
    Location
    nicosia
    Posts
    17
    Rep Power
    32
    hi,

    chek the TORSİON SPRİNG at document feeder. if you have new one chane it or adjust it with pliers(

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here