C258 custom boot screen

[copyman]

How to remove the previous dealer custom boot screen? Know there is a boot converter app to customize but I want to change back to factory default. Not sure if this is were you change it but went to system 2 , 2nd page and looks like the customize screen tab is missing? Is there a soft switch to turn it on? Or is there another procedure to change boot screen back to factory default? Probably could find it in service manual, sorry for being lazy.

Thanks in advance

[Synthohol]

13.23.1 BootUp Screen
...
3. Touch [System 2] -> [ ] -> [Import Config. Data] -> [BootUp Screen].
4. Touch [Set].
5. Check result “OK” is displayed and touch [END].
NOTE
▪ If logo data is already registered, new logo data overwrites the existing logo data.
▪ The color of logo data may look different between the machine control panel and some PC screens. After registering logo
data, restart the machine and check the color of the logo data on the BootUp screen.
* To delete registered data, touch [Delete] and check result “OK” is displayed.

[copier tech]

How to remove the previous dealer custom boot screen? Know there is a boot converter app to customize but I want to change back to factory default. Not sure if this is were you change it but went to system 2 , 2nd page and looks like the customize screen tab is missing? Is there a soft switch to turn it on? Or is there another procedure to change boot screen back to factory default? Probably could find it in service manual, sorry for being lazy.

Thanks in advance

You can also delete it from the trouble reset screen.

Power on the device while holding down reset (yellow key) once at the trouble reset screen press delete.