Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician
    Join Date
    Nov 2019
    Location
    Germany
    Posts
    38
    Rep Power
    9

    Exclamation bizhub 4050i - C6001 DF related configuration error 1

    We just have a bizhub 4050i in the shop for repair and we are desperate...

    Have any of you had this error before and how did you fix it?

    We have already renewed all relevant parts, including the DF completely.
    We have reinitialized the machine several times, installed the latest firmware (G00-Q6), checked the machine type and the serial numbers...
    ADF is set to "Dual Scan Document Feeder"
    The error just won't go away..

    What are we missing?

    I found that too
    Detailed Code Differentiator = 0x1FFF - 108 Times

    Renewed Parts
    • DFCB
    • CPU Board
    • Base Board
    • DF Flat Cable
    • Connectors
    • the whole DF



    Error Code 6601, C6601, C-6601

  2. #2
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,318
    Rep Power
    86

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Are all of the replaced/new parts still in that machine or did you work step-by-step and swap it back everytime the error re-occured?

    I can imagine a faulty scanner assy might lead to this ussue as a side effect since it probably shares some data paths.

  3. #3
    Senior Tech 100+ Posts Mitch Barron's Avatar
    Join Date
    Mar 2013
    Location
    Näfels
    Posts
    180
    Rep Power
    25

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by hobbele View Post
    We just have a bizhub 4050i in the shop for repair and we are desperate...

    Have any of you had this error before and how did you fix it?

    We have already renewed all relevant parts, including the DF completely.
    We have reinitialized the machine several times, installed the latest firmware (G00-Q6), checked the machine type and the serial numbers...
    ADF is set to "Dual Scan Document Feeder"
    The error just won't go away..

    What are we missing?

    I found that too
    Detailed Code Differentiator = 0x1FFF - 108 Times

    Renewed Parts
    • DFCB
    • CPU Board
    • Base Board
    • DF Flat Cable
    • Connectors
    • the whole DF



    Error Code 6601, C6601, C-6601
    Have you replace the ADF? it may be the ADF the problem.

  4. #4
    Technician
    Join Date
    Nov 2019
    Location
    Germany
    Posts
    38
    Rep Power
    9

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by Gift View Post
    Are all of the replaced/new parts still in that machine or did you work step-by-step and swap it back everytime the error re-occured?

    I can imagine a faulty scanner assy might lead to this ussue as a side effect since it probably shares some data paths.
    Everything was installed and dismantled step-by-step.

    Unfortunately, there is not much on the scanner. Just a motor and the CIS.
    The scanner does not move and we have now renewed the base board again. However, again without success.

    Thanks for you reply

  5. #5
    Technician
    Join Date
    Nov 2019
    Location
    Germany
    Posts
    38
    Rep Power
    9

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by Mitch Barron View Post
    Have you replace the ADF? it may be the ADF the problem.
    Yes, the complete ADF was replaced, as I already mentioned in my initial post ;-)

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,142
    Rep Power
    346

    Re: bizhub 4050i - C6001 DF related configuration error 1

    I had those 0x1FFF once and we ended up replacing CPUB.
    As you already said CPUB was replaced but was it with new or used?
    If used your need some extra steps to be done.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  7. #7
    Technician
    Join Date
    Nov 2019
    Location
    Germany
    Posts
    38
    Rep Power
    9

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by tsbservice View Post
    I had those 0x1FFF once and we ended up replacing CPUB.
    As you already said CPUB was replaced but was it with new or used?
    If used your need some extra steps to be done.
    Its a new CPUB

    I'm wondering why the scanner isn't moving... I don't think it's necessarily the C60-01. This error is only thrown because the scanner is not moving...
    Motor, flat cable, CIS has already been renewed...

    We just reset the machine with the reset tool to rule out errors here too... unfortunately still the same error.

  8. #8
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,318
    Rep Power
    86

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by hobbele View Post
    Its a new CPUB

    I'm wondering why the scanner isn't moving... I don't think it's necessarily the C60-01. This error is only thrown because the scanner is not moving...
    Motor, flat cable, CIS has already been renewed...

    We just reset the machine with the reset tool to rule out errors here too... unfortunately still the same error.
    The scanner must show some movement if you turn the MFP on. You can also move the CIS out of the home position toward right and check
    if it moves back after turning the MFP on.

    If it doesn't move at all try another scanner unit or check the motor, flat cable, home position sensors...

  9. #9
    Technician
    Join Date
    Nov 2019
    Location
    Germany
    Posts
    38
    Rep Power
    9

    Re: bizhub 4050i - C6001 DF related configuration error 1

    Quote Originally Posted by Gift View Post
    The scanner must show some movement if you turn the MFP on. You can also move the CIS out of the home position toward right and check
    if it moves back after turning the MFP on.

    If it doesn't move at all try another scanner unit or check the motor, flat cable, home position sensors...
    As I said, the Motor and the Flat Cable have already been replaced.
    The sensor has been checked. Everything is good.

    We are now getting the machine replaced by KonicaMinolta. There was a specialist there who hadn't found the error either...

  10. #10
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,318
    Rep Power
    86

    Re: bizhub 4050i - C6001 DF related configuration error 1

    There was a specialist there who hadn't found the error either...
    Poor guy

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here