Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    I can CANON froozen's Avatar
    Join Date
    Dec 2008
    Location
    Usak
    Posts
    20
    Rep Power
    32

    Konica Minolta 7235 Help

    i have a big problem with this machine. i have changed drum, drum blade and developer new but copy is very bad, how can i fix the copy ? and when i take a copy 1. cassette its working much and gives code E-89-2.... and who can give this macine's simulation codes and setup ?

  2. #2
    Field Service Manager 1,000+ Posts
    Konica Minolta 7235 Help

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,076
    Rep Power
    51
    Manual says it's the SCB ( System Control Board ) but if I'm not mistaken E89 codes often are generated when the print controller doesn't boot properly, this can be because corrupt firmware in controller or bad main body HDD. I would try removing the print controller if you have one, and doing a HDD Format if you have one.

    As far as your quality issue, if you performed L Detect when changing Dev and Drum Ch wire and Blade have been done all should be well, tell us more about the quality, too light? too dark? streaks? Just saying bad quality doesn't give us much to go on.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  3. #3
    haydar64
    Guest

    Smile

    Kanimca düzelmez.

    Ama sen bİ foto koy bakalim...

  4. #4
    I can CANON froozen's Avatar
    Join Date
    Dec 2008
    Location
    Usak
    Posts
    20
    Rep Power
    32

    Unhappy


    these are the copies
    Bundan ötesi ;
    Ya İSTİKLAL , Ya ÖLÜM!

  5. #5
    Field Service Manager 1,000+ Posts
    Konica Minolta 7235 Help

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,076
    Rep Power
    51
    That looks like a developer issue, turn the dev by hand and see if you have any voids ares on the mag roller, make sure mixer bushings aren't seized.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  6. #6
    I can CANON froozen's Avatar
    Join Date
    Dec 2008
    Location
    Usak
    Posts
    20
    Rep Power
    32
    machine still shows E-89-2, i couldnt solve it, and i dont have another same machine
    Bundan ötesi ;
    Ya İSTİKLAL , Ya ÖLÜM!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here