C450i poor print quality

[barber782]

Try Switch 153 change to Hex 40,

run Stablisation after and grads

Solids will be so much better

[Alex3C]

Try Switch 153 change to Hex 40,

run Stablisation after and grads

Solids will be so much better

Already had that setting, didn't make any noticeable diference

[Gift]

Didn't make any noticeable diference.
Also updated FW from G00-E9-990 to GC2-Q8(00). (no difference)

While search the forum i found the exact same issues i'm facing but in other better words:
Bizhub c250i magenta stripes and grainy color
The magenta and the grainy "low quality" colors.

Unfortunately there is no end of the story but the samples are good tu understand what bothers you.
I just comapred it with a used C450i (CY druma @60% remaining life) and depending on the lightning condition,
paper and viewing angle the result can look pretty compareable:

IMG_20240327_080417.jpg