Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Apr 2008
    Posts
    148
    Rep Power
    34

    C253 with all P codes

    Hello everyone,

    i have a c253 with P6,P7,P8,P9 warning codes and will not come to ready. Constantly says stabilizing please wait.

    I have tried the following IUís replaced,HV+MFP+PRCB boards replaced, Laser units replaced. Still NG

    I did find a cut in the laser cable so replaced this as well but the machine still reports all p codes and stays on stabilizing please wait. i have also tried system and data error clears.

    HELP!

  2. #2
    Technician
    Join Date
    Jul 2008
    Posts
    29
    Rep Power
    32
    Try changing the transfer belt and clean the ID sensors. I know on the C451 series machine there has been some special firmware released to stop the display of P codes (due to the codes appearing for no visible reason). Might be worth checking f/w version or if some special firmware is available for the P codes.

  3. #3
    Field Service Manager 1,000+ Posts
    C253 with all P codes

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,073
    Rep Power
    51
    popcornpuppy is probably right I had one pop a P6,p7,p8, p21 right after replacing the print heads. I assumed it had something to do with the heads, so the last thing I tried was the TX Belt, I really wish it was the first thing since it's the easiest , well live and learn.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  4. #4
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97
    Book says IDC guide out of adjustment front or rear. Try adusting (3mm +-) little at a time

  5. #5
    Field Service Manager 1,000+ Posts
    C253 with all P codes

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,073
    Rep Power
    51
    If it is the IDC pull out the TX belt you should see a perfect pattern on the belt, if the pattern is not there forget the sensor theres nothing for it to see.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here