Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Sep 2009
    Posts
    11
    Rep Power
    30

    Konica bizhub 1050 error code

    does anyone know what the code SC 23-13 means and how to fix???

    thanks
    David

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Location
    Arcata, CA
    Posts
    63
    Rep Power
    33
    SC23-13 Air separation motor (M10) rotation abnormality.

    Since an error is detected when M10 turns ON, turn it OFF. An error is still detected when turn it ON again. Air separation motor (M10) Air motor encoder sensor (PS30) Resetting of the intermediate toner hopper section

    I believe they separate paper in the trays. check fans by hand, mabie just got stuck or some paper in them.

  3. #3
    arisalonica
    Guest
    If you still have the problem just take a look on the ICP 23 on the printer control board.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jan 2008
    Location
    derbyshire
    Posts
    50
    Rep Power
    34
    Sc23-13 intermediate toner hopper gears not meshing correctly or locked/blockage can also cause this error

  5. #5
    Trusted Tech 50+ Posts TonerMonkey's Avatar
    Join Date
    Jun 2005
    Location
    Japan
    Posts
    71
    Rep Power
    39
    It's the sensor below the cover to the right of the optics looking at the top of the machine, it will be covered in toner most likely.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    Marianna, FL
    Posts
    158
    Rep Power
    32

    code

    Yes I agree I have ran into the dirty sensor a few times

  7. #7
    Trusted Tech 50+ Posts costel fasola's Avatar
    Join Date
    Jun 2010
    Posts
    69
    Rep Power
    0

    Re: Konica bizhub 1050 error code

    "It's the sensor below the cover to the right of the optics looking at the top of the machine, it will be covered in toner most likely. " Resolved issues .THANKS
    Last edited by costel fasola; 05-05-2012 at 06:27 PM.

  8. #8
    Big Jon
    Guest

    Re: Konica bizhub 1050 error code

    The sensor under the right cover also resolved this code for me. Thank you all for taking the time to post !

  9. #9
    Junior Member
    Join Date
    Jun 2014
    Posts
    7
    Rep Power
    0

    Thumbs up Re: Konica bizhub 1050 error code

    verifi the icp-5 on adu drive board, 9if are blow or opened change him

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here