Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Snow Leopard

  1. #1
    Senior Tech 100+ Posts
    Snow Leopard

    Taminol's Avatar
    Join Date
    May 2007
    Location
    London
    Posts
    171
    Rep Power
    36

    Snow Leopard

    Ah yes, Snow Leopard and the lack of drivers offered by KM.
    Here's my problem. I have a potential customer who runs SL and wants to upgrade his Ricoh Aficio 250 to a KM device. However, funds are limited. Only 1500 ($2500) available. He'd ideally like colour, must have A3 and isn't too bothered about scanning.
    I have a recon C350 which is in the right ballpark, but I cannot find any mention of 10.6 drivers.
    Or I could probably stretch to a C250
    What would you guys recommend.
    I'm pretty sure there isn't enough money for even a brand new B&W device. I looked at the 222 (which can use the 10.5 driver).
    Any suggestions?

  2. #2
    Senior Tech 100+ Posts buster68's Avatar
    Join Date
    Nov 2008
    Posts
    181
    Rep Power
    33
    I would go with the C250. Atleast in that respect you would have some functionality for printing with SL10.6. Unless the C350 has a Fiery print controller, its not compatible with any MAC OS.

  3. #3
    Senior Tech 100+ Posts
    Snow Leopard

    Taminol's Avatar
    Join Date
    May 2007
    Location
    London
    Posts
    171
    Rep Power
    36
    Quote Originally Posted by buster68 View Post
    I would go with the C250. Atleast in that respect you would have some functionality for printing with SL10.6. Unless the C350 has a Fiery print controller, its not compatible with any MAC OS.
    Oh, I didn't realise it wasn't compatible full stop - without the Fiery.
    I'd seen some drivers on 'onyxftp', they were C350 MAC drivers, but on closer inspection, they were specific to the Fiery.
    Good point - wel made!

    According to a document produced by KM, the C250 Snow Leopard 10.6 driver is expected in July 2010. But as an alternative I can use 10.5 (Leopard). However, they make a disclaimer about using 10.5. It reads....In case of not set to default printer, some of printer setting might not work correctly and Some unnecessary message might appear during operation of driver

    Have you had 10.5 working on SL on a C250?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here