Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    102
    Rep Power
    0

    Bizhub C450 fiery password Cleaning

    hi guys .
    i buy a konica C450.it has a fiery .not an on board fiery . when i want to go the run setup and changing the tcp - ip ,Copier,s fiery wants Password.and my is 000.000.000.000 .
    what i have to do ?
    how can I Clean this password .
    Please help me with this problem.
    thank all of you .

  2. #2
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    Password is default "Fiery.1" without quotes.

    Download the attached files, will explain what you need to do and has everything you need to do it.

    You can download "fiery downloader" from many sources.

    here is one....

    Fiery Downloader
    Attached Files Attached Files
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    102
    Rep Power
    0

    need a help

    thanks my friend for your reply and give me needable tools very much
    but when i want to connect to the copier via fiery downloader . i fill the blanks rightly like pdf guidence file that you send it to me (Fiery downloader.pdf). I enter the server name,(My server name is "PS-OCER56") and new device ("172.20.5.243").
    But i cant Connect to the fiery.It shows an error to me . Its ("General Error from network layer 5012 or 1012")
    do you think that i have to do an special job for fixing this error ?
    thanks for your reply.

  4. #4
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    I suspect you are not connecting properly because of a network difference.

    On the copier, press the utility key and then the controller button on the screen. From there, press menu, then print and select "config page". The machine should print out a config page. You will have to set your PC network settings to match the network settings on the fiery. From there, you can then use the utility.

    Or, you can also gain access to another feature on the fiery. Factory Default. I think it is through the menu and then setup option. Factory default will force clear all user settings on the fiery, as well as clear any queues and log files. Essentially it will force the fiery back to a state where it can be configured with new user settings. The network will go to DHCP mode, allowing you to physically connect to the copier through the network. You can then get it to give you a config page from that and you will be told what the IP address the machine grabbed from your router/DHCP server. From that, you can then web access the controller and configure it as you need. The password is also reset back to factory default of "Fiery.1" without the quotes.


    Likely the easiest way to get around this problem is to
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    May 2008
    Location
    malibu
    Posts
    102
    Rep Power
    0
    Quote Originally Posted by Stirton.M View Post
    I suspect you are not connecting properly because of a network difference.

    On the copier, press the utility key and then the controller button on the screen. From there, press menu, then print and select "config page". The machine should print out a config page. You will have to set your PC network settings to match the network settings on the fiery. From there, you can then use the utility.

    Or, you can also gain access to another feature on the fiery. Factory Default. I think it is through the menu and then setup option. Factory default will force clear all user settings on the fiery, as well as clear any queues and log files. Essentially it will force the fiery back to a state where it can be configured with new user settings. The network will go to DHCP mode, allowing you to physically connect to the copier through the network. You can then get it to give you a config page from that and you will be told what the IP address the machine grabbed from your router/DHCP server. From that, you can then web access the controller and configure it as you need. The password is also reset back to factory default of "Fiery.1" without the quotes.


    Likely the easiest way to get around this problem is to
    but my friend i dont have any problem with the main fiery of copier.
    my fiery is extra.Its {Fiery x3e}?
    is my job right? does it work for this fiery ?

  6. #6
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    The Fiery controller IS an external unit.

    There is no internal "Fiery", you are describing an internal controller of the copier which is NOT called a fiery.

    The information I provided you is to deal with the Fiery itself, not the empiron controller.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  7. #7
    kkd321
    Guest

    Need another help!

    Quote Originally Posted by Stirton.M View Post
    The Fiery controller IS an external unit.

    There is no internal "Fiery", you are describing an internal controller of the copier which is NOT called a fiery.

    The information I provided you is to deal with the Fiery itself, not the empiron controller.
    Hi, I have similar problem with above fiery x3e series, I input default fiery.1 / admin / sysadm / something, but it doesn't work at all...even the factory default. How can I reset all logs and others?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here