Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: C452 Problem

  1. #1
    Senior Tech 100+ Posts buster68's Avatar
    Join Date
    Nov 2008
    Posts
    181
    Rep Power
    33

    C452 Problem

    I'm wondering if anyone has seen this, and if you have a fix for it. I have a C452 brandnew out of the box giving a P-28 code 5 seconds after the copier is turned on. Can't continue with set up because gradation fails due to P-28 code. I've changed the IDC sensor assembly, transfer belt and all imaging units...still getting P-28. My next option is to start looking at High voltage units and control boards. But I wanted to see if anyone here could give me a heads up before I go that route. Thanks in advance.

  2. #2
    Senior Tech 100+ Posts buster68's Avatar
    Join Date
    Nov 2008
    Posts
    181
    Rep Power
    33
    Nevermind...the PRCB fixed the problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here