Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Aug 2009
    Posts
    11
    Rep Power
    30

    Angry kyocera boy needs Konica's help

    We have a km-2230 that is printing really wierd. Out of 100, we will have 10 prints that right in the middle of page it will drop all colors except one for the rest of the page and then it will be fine for a while and then come back. Please email at craigd@cbp-sd.com. I am pulling my hair out on this one.


    Doedee316
    Attached Files Attached Files

  2. #2
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    This machine is a similar model to the C350 series machine. Obsolete by our standards (not official, but from a tech point of view).

    That said, the HV board may be primarily at fault, failing, either HV1 or HV2. However, things to check....

    Check the bias connections from the HV board to the transfer belt. We have removed the HV boards on all these models and physically soldered a star type lock washer to the backside of the board where the board makes physical contact to the tin conductors that go to the belt unit.

    Check the second transfer/horizontal unit. Check the physical connections of all metal to metal tabs. If I recall, there is a varistor in there...make sure it is also making full circuit connection.

    The print head can also be at fault here. Check the ground connects for full contact...use star washers. Shielding of cable from print head should also be checked.

    MFPB may be failing.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

  3. #3
    Major Asshole! 2,500+ Posts
    kyocera boy needs Konica's help

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,294
    Rep Power
    86
    Found this one, don't know if it applies to your case, but it's worth checking:

    DESCRIPTION: One or more colors, usually cyan or magenta, drop out intermittently from front-to-rear during copying or printing.

    CAUSE: A failed PWB-MFP.

    SOLUTION: Replace PWB-MFP (p/n 4036780301).

    Be aware that this part number might not be compatible with your machine - you should compare a Konica parts manual with the one you got.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here