Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Service Manager 100+ Posts
    bizhub C220  jam code 11-44

    big jase's Avatar
    Join Date
    Jul 2008
    Location
    Barnsley
    Posts
    136
    Rep Power
    33

    bizhub C220 jam code 11-44

    Has anyone else had this jam code showing on this machine. Causing me a knightmare
    I've seen tni report to change wire loom on tray 1 but konica have no stock

    Has anyone got a fix
    If at First you don't succeed remove all evidence of ever trying!

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    828
    Rep Power
    50
    Had lots of trouble with this code. Main causes are poor quality feed clutches (come with rusty internals from new), deformed feed units which causes binding and slow feeding, and low spring tension on the sensor flag under the large black registration roller. Can be a combination of all these but the clutches are the likely suspects. Set the loop timing to -3 for all trays, this gives maximum loop & seems to help. The wiring fault is not so common but you never know. Hope some of this helps...

  3. #3
    Service Manager 100+ Posts
    bizhub C220  jam code 11-44

    big jase's Avatar
    Join Date
    Jul 2008
    Location
    Barnsley
    Posts
    136
    Rep Power
    33
    Thanks tech 51 , certainly gives me somethings to try as , KM have no stock on wire looms anyway
    If at First you don't succeed remove all evidence of ever trying!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here